High Heat Etch Primer

Solvent Based Etch Primer

 

Suitable for All Types of Metal

Product Description

GENERAL DESCRIPTION: An excellent single-pack vinyl-base etch primer for ferrous and non-ferrous metals such as galvanised iron and aluminium. The product contains a chromate based corrosion inhibitor, has superior welding properties and adhesion for use in high heat applications such as fireplaces, braai’s etc.

USES: Shop or pre-fabrication primer for protection of metal during transportation, storage and fabrication. Metal primer suitable for use under a wide range of finishing coats. Used interior or exterior.

FEATURES & BENEFITS:

  • Heat resistant
  • Excellent etching & adhesion properties
  • Superior welding properties

TECHNICAL INFORMATION

PHYSICAL FORM: Flammable low viscosity coloured liquid containing pigments

COLOUR: Black

FINISH: Semi Sheen

SPREADING RATE: Approximately 7 m² per litre per application

POLYMER TYPE: Phenolic modified vinyl copolymer

PIGMENTS: Contains chromate-based corrosion inhibitor

DRYING PROPERTIES: Surface or touch-dry: within 15 minutes

RECOATING TIME: 4 hours depending on conditions and film build

FLASH POINT: < 21°C (Abel Closed Cup method). (Note: Product is highly flammable)

PACKAGING: 1L & 5L

THINNING: If required to reduce viscosity add a minimum quantity of lacquer thinners. (NB. DO NOT add water, mineral turpentine or E–Thinners)

CLEANING: Do not allow the product to dry on equipment. Equipment is readily cleaned using SNK7 or methylated spirits. Lacquer thinners may also be used for cleaning. NOTE: Do not apply paint if it is raining or rain is expected within 4 hours, or if the surface Temperature is below 4°C

APPLICATION METHOD: Supplied ready-for-use using a brush or spray. May also be applied using a Short Pile Glassfibre roller

DO NOT PAINT

  • IF THE TEMPERATURE IS BELOW 10° C OR ABOVE 35° C
  • IF THE SURFACE IS DAMP (MOISTURE READING ABOVE 15%)
  • IF IT IS RAINING OR RAIN IS FORECAST
  • BEFORE 9H00 AND AFTER 16H00 IN THE WINTER

HEALTH & SAFETY ADVICE: The product contains a flammable solvent. Precaution must be taken to prevent naked flames coming in contact with vapours (i.e. smoking must be prohibited). Solvents may also cause narcotic effects if the vapour concentration is too high: always ensure adequate ventilation (do not use solvent based paints in a poorly ventilated or closed space). Avoid contact with skin, eyes, mouth etc. Wear protective clothing, goggles & gloves. If body contact is made, rinse off immediately. Wash product off skin before it has dried using soap and water.

DISCLAIMER ADVICE: The information given in this Product Information Sheet is based on controlled laboratory tests and many years of experience. It is given in good faith but no guarantee of any performance characteristic is given or implied. RB10 paints cannot be held liable for consequential damage of whatsoever nature that may arise from the use of RB10 products. Paint technology is continuously being developed and RB10 Paints reserves the right to update product specifications without prior notice. Contact RB10 Paints for further details.

Technical Data Sheet

Download Technical Data Sheet here

Safety Data Sheet

Download Safety Data Sheet here