Paint Stripper Brush On

Active Stripper for Enamels & Varnishes


  • Wood Surfaces
  • Metal Surfaces
  • Stone Surfaces

Available in 750ml and 5L

Product Description

GENERAL DESCRIPTION: A vicious non-flammable, water rinsable solvent based paint remover for brush application. Lead Free and quick acting paint stripper. Formulated to SABS 1323, Type A.

USES: Suitable for conventional types of paints, enamels, varnishes, lacquers as well as sophisticated and polymeric coating systems on wood, plaster, steel and most other metals. Can easily be used on surfaces in any orientation. The high concentration of active ingredients gives an excellent stripping capability. Free of carbon tetrachloride and phenolic compounds. Good rinsing properties and high concentrate stability. Does not lift wood grain nor impair repaint ability when used correctly.


  • Non flammable
  • Lead free
  • Quick acting


SPREADING RATE: Approximately 1m2 per litre per application

DRYING PROPERTIES: Brush on and leave for about 5 – 15min

FLASH POINT: Not flammable in liquid form

PACKAGING: 750ml & 5L

THINNING: Not recommended

CLEANING: Do not allow product to dry on equipment. Clean all equipment and overspray material with water before the product has dried. (Some detergent may be added to the water to facilitate clean-up)

APPLICATION METHOD: Brush on the paint stripper to give a wet thickness of approximately 1mm. Leave to lift the paint for 5 – 15 minutes. (For best results use on cool or cold surfaces.) Close containers immediately after use to prevent evaporation of the active ingredients. Scrape off the lifted paint with a paint scraper, or wash off using a high pressure water jet. If scraped off wipe down the stripped surface with water prior to repainting

HEALTH & SAFETY ADVICE: The product contains a flammable solvent. Precaution must be taken to prevent naked flames coming in contact with vapours (i.e. smoking must be prohibited). Solvents may also cause narcotic effects if the vapour concentration is too high: always ensure adequate ventilation (do not use solvent based paints in a poorly ventilated or closed space). Avoid contact with skin, eyes, mouth etc. Wear protective clothing, goggles & gloves. If body contact is made, rinse off immediately. Wash product off skin before it has dried using soap and water.

DISCLAIMER ADVICE: The information given in this Product Information Sheet is based on controlled laboratory tests and many years of experience. It is given in good faith but no guarantee of any performance characteristic is given or implied. RB10 paints cannot be held liable for consequential damage of whatsoever nature that may arise from the use of RB10 products. Paint technology is continuously being developed and RB10 Paints reserves the right to update product specifications without prior notice. Contact RB10 Paints for further details.

Technical Data Sheet

Download Technical Data Sheet here

Safety Data Sheet

Download Safety Data Sheet here