Super Cold RBE

Rubberised Bitumen Emulsion

 

  • Waterproofing of roofs and parapets
  • Sealing of ponds, dams etc
  • Asbestos-free
  • Non-toxic

Product Description

GENERAL DESCRIPTION: RB10 Super Cold Rubberised Bitumen Emulsion is a single component rubberised-bitumen based waterproofing and sealing paint. It can also be used in conjunction with a reinforcing fabric to provide a liquid waterproofing system. Cured film is non-toxic.

USES: Waterproofing of roofs and parapets as well as sealing of ponds, dams etc. Applied for Tanking and Waterproofing Structures. Can also be used in place of RB10 Flex-E-Proof, impregnating liquid in the reinforcing membrane waterproofing system, by applying one saturator coat, onto a sound surface followed by one finishing coat. Can also act as a curing agent when applied to fresh concrete. May be applied to damp, but not waterlogged surfaces.

FEATURES & BENEFITS:

  • Lead free
  • Non toxic
  • Highly durable
  • Tough & flexible

TECHNICAL INFORMATION

PHYSICAL FORM: Dark Brown / Black viscous Liquid

COLOUR: Dries Black

FINISH: Low sheen

SPREADING RATE: 4 – 6m² per litre per application

POLYMER TYPE: Rubberised Bitumen Emulsion

MASS SOLIDS: 55%

S.G.: 1,265kg/L

VOLUME SOLIDS: 43%

PH: PVC: 28%

VISCOSITY: 100-105ku

DRYING PROPERTIES: Touch dry 1 hour

RECOATING TIME: Over coating time 2 – 4 hours-depending on temperature conditions @ 23˚C

FLASH POINT: N/A – Waterborne Product

PACKAGING: 1L, 5L & 20L

THINNING: Not recommended, but if required to reduce viscosity add a 10% maximum quantity of Water. Excessive dilution degrades the quality of the product

CLEANING: Do not allow the product to dry on equipment. Equipment is readily cleaned using water or when CLEANING dry mineral turpentine, lacquer thinners or cleaning solvent

APPLICATION METHOD: Supplied ready-for-use, cold applied. Stir well then apply using a brush or roller. First coat does not need to be diluted when applied to porous surfaces. Apply at least 3 coats for pond or dam linings. Leave each coat to cure for at least 4h before applying the next coat. Leave the complete coating system to age for at least 10-14 days before filling the pond or dam. Use the reinforcing membrane for cracked or uneven surfaces. Make sure that the fabric is thoroughly impregnated with RBE Super Cold Rubberised Bitumen to ensure optimum waterproofing properties.

DO NOT PAINT

  • IF THE TEMPERATURE IS BELOW 10° C OR ABOVE 35° C
  • IF THE SURFACE IS DAMP (MOISTURE READING ABOVE 15%)
  • IF IT IS RAINING OR RAIN IS FORECAST
  • BEFORE 9H00 AND AFTER 16H00 IN THE WINTER

APPLICATION DETAILS

SURFACE PREPARATION: Surfaces must be dry, clean, sound and free of any loose material. (e.g. Peeling paint, rust etc.) a) Metal surfaces must be primed with a suitable RB10 Multi-Primer metal primer. b) Masonry surfaces must be sealed with a good quality bonding liquid, to ensure the surface is sound before applying RBE Super Cold Rubberised Bitumen.

HEALTH & SAFETY: Keep paint away from children. Never smoke, drink or eat while painting. Wear protective overalls, gloves and goggles. If accidental contact with skin should occur, wash immediately with clean water. Harmful if swallowed. Do not induce vomiting. Consult your doctor. Ensure good ventilation during application and drying. Store in a cool, dry place out of the sun.

DISCLAIMER ADVICE: The information given in this Product Information Sheet is based on controlled laboratory tests and many years of experience. It is given in good faith but no guarantee of any performance characteristic is given or implied. RB10 paints cannot be held liable for consequential damage of whatsoever nature that may arise from the use of RB10 products. Paint technology is continuously being developed and RB10 Paints reserves the right to update product specifications without prior notice. Contact RB10 Paints for further details.

Technical Data Sheet

Download Technical Data Sheet here

Safety Data Sheet

Download Safety Data Sheet here